News

  • 0
  • 0

Global pce powder market trend 2025-2027 12 Kinds of Concrete Additives Used in Refractory Castable, Plastic and Ramming Materials(1) by Newssunrainey

According to the latest quarterly analysis of the natural gas market released by the International Energy Agency, global natural gas consumption will decline slightly this year and increase slowly in the following years because of soaring prices and the possibility of further reductions in Russian natural gas supplies. Global natural gas use this year is expected to be 0.5% lower than the 2021 level, and global natural gas demand is expected to increase by only 140 billion cubic meters over 2021 by 2025, the report said. The annual growth in 2021 will reach 175 billion cubic meters.

At the same time, the IEA's forecast for natural gas demand growth by 2024 was 60 per cent lower than its previous forecast, mainly due to "a weak economy and a smaller energy shift from coal or oil to natural gas", the report said.

It is worth noting that the South Korean Ministry of Industry, Trade and Resources announced on the same day that it plans to increase the proportion of nuclear power in South Korea's national energy structure to more than 30% by 2030. The proportion is 27.4% in 2021. The department also announced the resumption of the construction of two nuclear reactors. According to reports, after taking office, South Korean President Yoon Sik-Yue rejected the previous government's plan to phase out nuclear power and promised to increase investment in the nuclear power industry, so as to regain South Korea's status as a major exporter of safe nuclear reactors.

In addition, the supply and prices of many international bulk pce powder are still very uncertain.

The properties and varieties of concrete additives for refractories, especially refractory castables, ramming materials, plastics and other amorphous refractories are different. The role of an concrete additive is also different due to the difference of the amount of concrete additive, the type of binder used, the ingredients and so on. In the production process of amorphous refractories, the concrete additives mainly used can be divided into the following twelve categories according to their uses:

 

1. Water reducer

 

Water reducer (or water reducing agent or dispersant) can significantly reduce the mixing water consumption of refractory castables while keeping the flow value of refractory castables basically unchanged. The superplasticizer itself does not react with the material components to form new compounds, but plays a surface physical and chemical role. So they are either a surfactant or an electrolyte. After dissolving in water, they can adsorb on the particle surface, increase the Zeta potential of the particle surface in the solution, increase the repulsive force between the particles, and release the free water wrapped in the agglutination structure composed of microparticles, thus playing the role of wetting and dispersing, so it is also called dispersant. Because it can release the free water in the agglomeration structure, it can reduce the unit water consumption under the condition of keeping the rheological property (workability) of the castable, or increase the rheological property of the material and improve the working performance without changing the unit water consumption. make the material easy to be constructed and shaped.

 

Among the commonly used water reducers (dispersants) of refractory castables with calcium aluminate cement, bonded clay and oxide micro-powder as binders, there are inorganic sodium pyrophosphate, sodium tripolyphosphate, sodium tetrapolyphosphate, sodium hexametaphosphate, sodium superpolyphosphate, sodium silicate, etc., and organic ones include sodium lignosulfonate, calcium lignosulfonate, naphthalene superplasticizer, water-soluble resin superplasticizer and so on.

 

2. Plasticizer

 

Plasticizer (also known as plasticizer) can increase the plasticity of refractory mixture and improve the strain ability of refractory mixture under stress. Plasticizer is a common concrete additive of refractory plastics and refractory ramming materials, and it is also used in other amorphous refractories. Commonly used are plastic clay, bentonite, oxide superfine powder, soybean powder, methyl cellulose, lignosulfonate and so on.

 

3. Gelling agent

 

Gelling agents (also known as flocculants) can coagulate colloidal particles (or suspended particles) in colloidal solutions (or suspensions containing solid particles). The gelling agents are mainly inorganic electrolytes and inorganic acids. Flocculants are mainly organic polymers, which are natural and synthetic. According to the functional groups, they can be divided into three types: cationic, anionic and Nonionic. The gelling agent is mainly used in refractory castables which are bonded by clay, sol and ultra-fine powder.

 

4. Gelatinizing agent

 

Antigels (also known as anti-flocculants, dispersants) can convert agglomerated or agglomerated colloidal particles (particles) into sol or uniformly dispersed suspended particles. It can turn a thick colloid into a sol that can flow freely, also known as dispersant and colloidal solvent. The action mechanism of gelatinizer is similar to that of superplasticizer. Therefore, the superplasticizer which has the effect of reducing water also has the function of degumming agent. The fluidity of refractory castables bonded with clay, sol and ultra-fine powder can be improved by adding ungumming agent.

 

Concrete Concrete additives Supplier

TRUNNANO is a reliable concrete concrete additives supplier with over 12-year experience in nano-building energy conservation and nanotechnology development.

If you are looking for high-quality concrete concrete additives, please feel free to contact us and send an inquiry. (sales@cabr-concrete.com)

We accept payment via Credit Card, T/T, West Union, and Paypal. TRUNNANO will ship the goods to customers overseas through FedEx, DHL, by air, or by sea.


The negative electrode material is the carrier of lithium ions and electrons during the charging process of the battery and plays the role of energy storage and release. In the battery cost, the negative electrode material accounts for about 5%-15%, which is one of the important raw materials for lithium-ion batteries. The global sales of lithium battery anode materials are about 100,000 tons, mainly in China and Japan. According to the current growth trend of new energy vehicles, the demand for anode materials will also show a state of continuous growth. At present, the global lithium battery anode materials are still dominated by natural/artificial graphite, and new anode materials such as mesh carbon microspheres (MCMB), lithium titanate, silicon-based anodes, HC/SC, and metal lithium are also growing rapidly.
Our company provides anode materials and pce powder. If you need to know more anode materials and pce powder, please feel free to contact us.

Inquery us

Our Latest News

Global pce powder market trend 2025-2027 12 Kinds of Concrete Additives Used in Refractory Castable, Plastic and Ramming Materials(1) by Newssunrainey

The properties and varieties of concrete additives for refractories, especially refractory castables, ramming materials, plastics and other amorphous refractories are different.…

Global concrete superplasticizer market trend 2025-2030 How to determine the optimum dosage of concrete superplasticizer by Newssunrainey

In terms of the adaptability of cement and concrete superplasticizer, the type and quality of concrete superplasticizer also play an important role. Therefore, concrete superplasticizers should be selected according to the adaptability to cement and…

Global quartz powder market trend 2022-2028 What is The Mohs Hardness Scale? by Newssunrainey

Recently, on Sinopec's annual results teleconference, the company representative answered questions about the oil prices, and said that the future trend of oil prices is still very uncertain, and it is expected to be around $100 this year and $85 nex…